LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostics) (Except For STI) (1 Of 4) >> Diagnostic Procedure With Diagnostic Trouble Code (DTC) >> DTC P0111: Intake Air Temperature Sensor 1 Circuit Range/Performance Bank 1 >> Execution Condition

Execution Condition

SECONDARY PARAMETERS AND EXECUTION CONDITION

Secondary parameters Execution condition
Battery voltage ≥ 10.9 V
Soaking time ≥ 21600 s
Block heater judgment Completed
Block heater operation Not in operation
SECONDARY PARAMETERS AND EXECUTION CONDITION

Secondary parameters Execution condition
Battery voltage ≥ 10.9 V
Engine coolant temperature ≥ 60°C (140°F)
Integrated value of intake air amount ≥ 5500 g
Number of experiences under following driving conditions ≥ 3 times
  • Duration of driving condition 1
≥ 10 s
Vehicle speed ≥ 40 km/h (24.9 MPH)
and
Amount of intake air
≥ 10 g/s (0.4 oz/s)
  • Duration of driving condition 2
≥ 15 s
Vehicle speed < 4 km/h (2.5 MPH)