Airbag Control Module: Installation

Before installation, inspect the following items and replace any faulty part with a new part.
- Control module is deformed.
- Control module connector is damaged.
- Control module mounting bracket is damaged.
Install the airbag control module.
CAUTION: Do not reuse the bolt and nut.

CAUTION: Always replace with the specified new bolts and nuts.

Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)
Install the cover - shift lever and the console box assembly.
Tightening torque:

6.5 N.m (0.7 kgf-m, 4.8 ft-lb)
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .

NOTE: After connecting the battery sensor terminal, place the select lever in the "P" position.