LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System (3.6L) (Diagnostics - Introduction)) >> General Scan Tool >> Operation >> Mode $04 (Clear/Reset Emission-Related Diagnostic Information)

Mode $04 (Clear/Reset Emission-Related Diagnostic Information)

WARNING: This page is about a different variant/trim than selected.

Refer to the mode used to clear or reset emission-related diagnostic information.

NOTE:
  • Refer to general scan tool manufacturer's operation manual to clear emission-related diagnostic information (MODE $04).
  • Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.