LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (3.6L)) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the under cover, Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  3. Drain the engine oil. Ref. to LUBRICATION (H6DO)>Engine Oil>REPLACEMENT .
  4. Disconnect the terminal from oil pressure switch.
    G10264240Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the oil pressure switch.
    G10264241Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals