LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (CVT Transaxle (Tr690)) >> Reduction Driven Gear >> Assembly

Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Using the ST, install the ball bearing to bearing retainer.

    ST 398177700 INSTALLER 

    NOTE:
    • Use a new ball bearing.
    • Make sure to install the ball bearing in the right direction.
    • Apply CVTF to the press-fitting area.
    G06654613Courtesy of SUBARU OF AMERICA, INC.
  2. Install the snap ring.
  3. Using the ST, install the reduction driven gear.

    ST 499277200 INSTALLER 

    G06654614Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals