LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System >> Stop Light Switch >> Installation

Stop Light Switch: Installation

  1. Install the stop light switch onto the bracket with screws and position it with the nut.
  2. Adjust the stop light switch position, and then tighten the nut. Ref. to BRAKE>Stop Light Switch>ADJUSTMENT .

    Tightening torque: 

    8 N.m (0.8 kgf-m, 5.9 ft-lb)

  3. Install the panel - knee guard.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb)

  4. Install the cover assembly - instrument panel LWR driver.
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals