Sunroof Assembly: Installation

CAUTION: Be careful not to snag the harness.

Install each connector and the drain tube - sunroof.
Tightening torque:

Connector holder: 7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

Ground bolt: 13 N.m (1.3 kgf-m, 9.6 ft-lb)
Install the cover side sill - front and the front cover - side sill.
Install the rail assembly - sunroof.
Tightening torque:

6 N.m (0.6 kgf-m, 4.4 ft-lb)
Install the curtain airbag module. Ref. to AIRBAG SYSTEM>CURTAIN AIRBAG MODULE>INSTALLATION .
Connect the harness connector of the drain tube - sunroof and the motor assembly.
CAUTION: Insert the four drain tubes 15 mm (0.59 in) or more into the drain pipes (a).

Courtesy of SUBARU OF AMERICA, INC.
Install the trim panel - roof assembly. Ref. to EXTERIOR/INTERIOR TRIM>ROOF TRIM>INSTALLATION .
Install the lid assembly - sunroof.
Tightening torque:

4.5 N.m (0.5 kgf-m, 3.3 ft-lb)
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .