Inspection Mode: Operation

DTC can be diagnosed by executing the Inspection Mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.

1. Using the Subaru Select Monitor, perform the clear memory for «Infotainment». Ref. to INFOTAINMENT (DIAGNOSTICS)>Clear memory .
2. Read the DTC of «Infotainment» using Subaru Select Monitor and check that the DTC is not displayed. Ref. to INFOTAINMENT (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) >.
   NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
3. After the ignition switch is ON, wait for one minute or more.
4. Read the DTC of «Infotainment» using Subaru Select Monitor and check that the DTC is not displayed. Ref. to INFOTAINMENT (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .
   NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.