DTC P065A: Generator/Alternator System Performance: Notes
DTC detecting condition:
Immediately at fault recognition
CAUTION:
- After servicing or replacing faulty parts, perform Clear Memory Mode Ref. to ENGINE (DIAGNOSTICS) (H4DO)>CLEAR MEMORY MODE>OPERATION ., and inspection mode Ref. to ENGINE (DIAGNOSTICS) (H4DO)>INSPECTION MODE>PROCEDURE .
- Use the check board when measuring the ECM terminal voltage and resistance.
- CHECK V-BELT
.
Check the V-belt. Ref. to MECHANICAL (H4DO)>V-BELT>INSPECTION .
Is the check result OK?
Yes: Replace the generator. Ref. to STARTING/CHARGING SYSTEMS (H4DO)>GENERATOR .
No: Replace the V-belt. Ref. to MECHANICAL (H4DO)>V-BELT .