DTC P05C0: Active Grille Air Shutter Module "A" Over Temperature: Notes
DTC detecting condition:
Immediately at fault recognition
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode Ref. to ENGINE (DIAGNOSTICS) (H4DO)>CLEAR MEMORY MODE>OPERATION
., and inspection mode Ref. to ENGINE (DIAGNOSTICS) (H4DO)>INSPECTION MODE>PROCEDURE
.
- CHECK DTC
.
- Turn the ignition switch to OFF, and cool down the engine enough.NOTE: Cool down the engine unit until it can be easily touched by hand.
- Turn the ignition switch to ON.
- Read the engine DTC using the Subaru Select Monitor or general scan tool. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>READ DIAGNOSTIC TROUBLE CODE (DTC) .
Is DTC P05C0 displayed? (Current malfunction)
Yes: Replace the active grille shutter. Ref. to COOLING (H4DO)>ACTIVE GRILLE SHUTTER .
No: Even if DTC is detected, it has returned to a normal condition at this time.
NOTE: In this case, there may have been a temporary rise of the temperature in the engine compartment. - Turn the ignition switch to OFF, and cool down the engine enough.