LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Outback 2.5i >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Reverse Automatic Braking System (Diagnostics) >> Control Module I/O Signal >> Electrical Specification >> Rear Vehicle Height Sensor Unit

Rear Vehicle Height Sensor Unit

G10272561Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Contents Measuring condition Standard
1 - - -
2 - - -
3 - - -
4 - - -
5 - - -
6 -    
7 -    
8 ←→ Chassis ground Rear vehicle height sensor signal IG ON (with no passenger, no load and vehicle stopped) Approx. 2.5 V (changes according to vehicle condition)
9 - - -
10 - - -
11 - - -
12 - - -
13 ←→ Chassis ground GND Always less than 1 Ω
14 ←→ Chassis ground Ignition power supply Ignition switch ON 8 - 16 V
15 - - -
16 - - -
17 ←→ Chassis ground - - -
18 ←→ Chassis ground - - -
19 ←→ Chassis ground - - -
20 ←→ Chassis ground - - -
21 - - -
22 ←→ Chassis ground - - -
23 ←→ Chassis ground Rear vehicle height sensor power supply Ignition switch ON 4.75 - 5.25 V
24 ←→ Chassis ground Rear vehicle height sensor GND Always Less than 1 Ω
25 ←→ Chassis ground CAN-H (CAN communication line) Cannot be measured -
26 ←→ Chassis ground CAN-L (CAN communication line) Cannot be measured -