Starter Relay: Inspection
WARNING: This page is about a different variant/trim than selected.
- Check that the starter relay does not have deformation, cracks and any other damage.
- Measure the resistance between starter relay terminals.
Terminal No. Standard 1 and 2 1 MΩ or more 3 and 4 128.07 - 156.53 Ω (when 20°C (68°F)) - Connect battery positive terminal to terminal No. 3 and battery ground terminal to terminal No. 4, and measure the resistance between the starter relay terminals.
Terminal No. Standard 1 and 2 Less than 1 Ω