Outback Model

CAUTION: If the hook - rear seat is disconnected from the vehicle body, make sure to replace the hook rear seat with a new part to prevent the decline of the fixed force of the seat.

Courtesy of SUBARU OF AMERICA, INC.

Install the backrest assembly - rear seat.
Tightening torque:

53 N.m (5.4 kgf-m, 39.1 ft-lb)
Install the backrest side pad.
Tightening torque:

53 N.m (5.4 kgf-m, 39.1 ft-lb)
Install the rear seat cushion.
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .