Reduction Driven Gear: Adjustment
- Measure the height "A" from the ST upper face to the ball bearing catch surface. Preparation tool:
ST: GAUGE (499575600)
- Measure the height "B" from the ST to the mating surface of the Transmission case. Preparation tool:
ST: GAUGE (499575600)
- Obtain the thickness of Transfer drive gear shim using the following formula to select one to three Transfer drive gear shims.
T mm = A - B - (0.05 - 0.25)
[T in = A - B - (0.002 - 0.01)]
T: Shim thickness
A: Height from the ST upper face to the ball bearing catch surface
B: Height from ST to Transmission case mating surface
0.05 - 0.25 mm (0.002 - 0.01 in): Clearance