LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis >> Suspension >> Front Suspension System And Wheel Alignment >> Wheel Alignment >> Inspection >> Camber

Wheel Alignment: Inspection: Camber

  1. Place the wheel on the turning radius gauge.
    NOTE: Make sure the ground contact surfaces of the front and rear wheels are at the same height.
  2. Set the adapter into the center of wheel, and then set the wheel alignment gauge.
    G13224934Courtesy of SUBARU OF AMERICA, INC.
  3. Measure the camber angle in accordance with the operation manual for wheel alignment gauge.
Front camber (difference between RH and LH 35' or less) Rear camber (difference between RH and LH 45' or less)
-0°05'±0°30' -0°50'±0°45'
scientia non olet · About LEMON Manuals