LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Impact Sensor >> Removal >> Front impact sensor

Front impact sensor

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the Front impact sensor.
    1. Remove the clips and remove the air intake duct (rear). (When removing the sensor RH)
      G13226286Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the bolt, and then remove Front impact sensor.
    3. Disconnect the Front impact sensor connector. Ref. to AIRBAG SYSTEM>AIRBAG CONNECTOR>PROCEDURE>EACH IMPACT SENSOR .
      G13226287Courtesy of SUBARU OF AMERICA, INC.
      G13226288Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals