LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Airbag Control Module >> Installation

Airbag Control Module: Installation

  1. Before installation, inspect the following items and replace any faulty part with a new part.
    • Control module is deformed.
    • Control module connector is damaged.
  2. Install the airbag control module.
    CAUTION: Do not reuse the bolt and nut.
    Always replace with the specified new bolts and nuts.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb)

  3. Install the duct console front, tray center UPR and panel center LWR.
  4. Install the cover assembly front and the console box assembly.

    Tightening torque: 

    Console box: 6.5 N.m (0.7 kgf-m, 4.8 ft-lb)

  5. Install the heater control assembly.
  6. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: After connecting the battery sensor terminal, place the select lever in the "P" position.
scientia non olet · About LEMON Manuals