LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection/Rear Cross Traffic Alert System (Diagnostics) >> Data Monitor >> List

Data Monitor: List

Items Contents Standard/Unit Note
SRVD System fail flag Current failure status of BSD/RCTA system is displayed.
  • Normal
  • NG
-
SRVD System HALT flag Current temporary stop status of BSD/RCTA system is displayed.
Temporary stop: Temporarily stops when reception of radar sensor waves failed due to some obstacles or when the temperature is not within the range of -40°C (-40°F) - 85°C (185°F).
Temporarily stops when the direction of the radar sensor is not correct.
  • Normal
  • Halt
-
SRVD System ON-OFF flag ON/OFF status of BSD/RCTA system is displayed. If this flag is set to [OFF] while the values of [SRVD System fail flag] and [SRVD System HALT flag] are [Normal], the BSD/RCTA system is set to OFF by the BSD/RCTA OFF switch.
  • OFF
  • ON
-
RH-Side BSD caution 1st flag ON is displayed when the 1st stage BSD warning on the right side is activated (outer mirror assembly illuminates).
  • OFF
  • ON
-
RH-Side LCA caution 1st flag ON is displayed when the 1st stage LCA warning on the right side is activated (outer mirror assembly illuminates).
  • OFF
  • ON
-
RH-Side RCTA caution flag ON is displayed when the RCTA warning on the right side is activated (when the outer mirror assembly illuminates and buzzer sounds).
  • OFF
  • ON
-
RH-Side Radar Voltage value Power supply voltage of the radar sensor RH is displayed. 0 - 25.5 V -
RH-Side Temperature value Ambient temperature of the radar sensor RH is displayed. -128 - 127°C -
RH-Side Autoalignment Result Right side radar auto alignment result -3276.8 - 3276.8 deg -