LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrumentation System & Driver Information Center >> Multi-function Display (MFD) System >> Inspection >> Check Clock System Communication Circuit

Check Clock System Communication Circuit

  1. CHECK POWER SUPPLY  .
    1. Disconnect the MFD connector.
    2. Turn the ignition switch to ON.
    3. Measure the voltage between MFD connector and chassis ground.

    Connector & terminal 

    (i122) No. 2 (+) - Chassis ground (-):

    Is the voltage 10 V or more?

    Yes  : Go to  2 .

    No  : Repair or replace the harness.

  2. CHECK GROUND CIRCUIT  .

    Measure the resistance between MFD connector and chassis ground.

    Connector & terminal 

    (i122) No. 3 - Chassis ground:

    Is the resistance less than 10 Ω?

    Yes  : Go to  3 .

    No  : Repair or replace the harness.

  3. CHECK MFD  .
    1. Remove the MFD.
    2. Attach the clock to another vehicle on which the clock display operates normally, and check its operation.

    Is MFD normal?

    Yes  : Repair the poor contact of connector.

    No  : Replace MFD.

scientia non olet · About LEMON Manuals