LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> ABS Sequence Control >> Operation >> Abs Sequence Control With SUBARU Select Monitor

Abs Sequence Control With SUBARU Select Monitor

NOTE: In the event of any trouble, the ABS sequence control will not operate.
  1. Connect the Subaru Select Monitor.
    NOTE: For detailed operation procedures, refer to "Help" of application.
    1. Turn the ignition switch to ON.
    2. On [Start] screen, select [Diagnosis].
    3. On [Select Vehicle] screen, input the target vehicle information and select [Set].
    4. On [Main Menu] screen, select [Each System].
    5. On [Select System] screen, select [Brake Control], and then select [Enter].
    6. On [Select Function] screen, select [Work Support].
    7. On the work support item list, select [ABS Sequence Control Mode].
  2. Follow the procedures displayed in the Subaru Select Monitor to execute the following.
    1. When using a brake tester, depress the brake pedal with a force of 100 N (10.2 kgf, 22.5 lbf).
    2. When using a pressure gauge, press the brake pedal so that the pressure gauge indicates 3, 500 kPa (36 kgf/cm2 , 511 psi).
  3. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About LEMON Manuals