DTC B2604: Power Seat Memory EEPROM

DTC detecting condition: 

When malfunction occurs in writing/reading the memory of Power Seat & Remote Control Mirror Control Module.

Trouble symptom: 

Seat operation is possible with manual operation, but not with memory function.

1. CHECK DTC  .
   1. Turn the ignition switch to ON.
   2. Read the DTC of [Power Seat Memory] using the Subaru Select Monitor. Ref. to POWER SEAT MEMORY (DIAGNOSTICS) DIAGNOSTIC TROUBLE CODE (DTC) .

   Is DTC B2604 displayed? (Current malfunction)

   Yes  : Replace Power Seat & Remote Control Mirror Control Module. Ref. to SEATS>POWER SEAT SYSTEM .

   No  : Even if DTC is displayed, the circuit has returned to a normal condition at this time. Reproduce the failure, and perform the diagnosis again.

   NOTE: In this case, temporary poor contact of connector, temporary open or short circuit of harness may be the cause.