Inspection Mode AH
| DTC | Item | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P04C2 | FUEL FILL DOOR UNLOCK CONTROL CIRCUIT HIGH | - | 1 |
| P2422 | EVAP SYSTEM VENT VALVE STUCK CLOSED | - | 1 |
NOTE:
Perform the inspection mode after warming up the engine except that the engine coolant temperature at engine start is specified.
- Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
- Using the Subaru Select Monitor, clear the memory of [Engine Control System]. Refer to COMMON (DIAG)>CLEAR MEMORY .
- Press the refueling request switch.
- Wait for 10 seconds after the fuel lid opened.
- Close the fuel lid.
- Turn the ignition switch to ON and wait for 10 seconds.
- Read the temporary code using the Subaru Select Monitor or general scan tool. Refer to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .