Inverter Assembly (With Converter) Cover

Install the inverter assembly (with converter) cover No. 1 (C).
Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)
Insert the inverter assembly (with converter) cover No. 2 (D) into the inlet port (A) of the floor under protector LH, and then install the bolt and clip (B).
Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)

Courtesy of SUBARU OF AMERICA, INC.
Lower the vehicle.