LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Universal Joint >> Removal

Universal Joint: Removal

  1. Set the steering wheel to the straight-ahead position.
  2. Adjust the tilt position of the steering column to the neutral position.
    CAUTION: Always place the tilt lever to the lock position after the steering column is adjusted.
  3. Prevent the steering wheel from turning using the seat belt.
    G11245584Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the under cover - front, Refer to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  5. Remove the universal joint assembly - steering.
    1. Place alignment marks on the universal joint assembly - steering.
      NOTE: Place alignment marks on the following positions.
      • Between the column assembly - steering and the universal joint assembly - steering
      • Between the steering gearbox assembly and the universal joint assembly - steering (only when the guide is not installed)
    2. Remove the bolt, and remove the universal joint assembly - steering.
      CAUTION: Do not remove the guide camera.
      G11245585Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals