Section 12 (Engine Cooling System (HEV)): Thermostat: Installation

WARNING: This page is about a different variant/trim than selected.

Install a new gasket to the thermostat.
NOTE: Align the positions of the jiggle pin (a) and the positioning rib (b) of the gasket.

Courtesy of SUBARU OF AMERICA, INC.
Install the thermostat and thermostat cover.
NOTE: Align the positions of groove (a) of the oil pan upper and the positioning rib (b) of the gasket.

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
Connect the radiator outlet hose.
Install the front exhaust pipe.
Refer to EXHAUST (H4DO (EXCEPT FOR HEV))>FRONT EXHAUST PIPE>INSTALLATION .
Connect the battery ground terminal.
Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
Fill engine coolant. (Engine side)
Refer to COOLING (H4DO (HEV))>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT>ENGINE SIDE .