LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Fuel Injection System) >> Fuel Insulator >> Removal

Fuel Insulator: Removal

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the intake manifold assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>INTAKE MANIFOLD ASSEMBLY>REMOVAL .
  3. Remove the fuel pump insulator (A) and fuel pipe insulator No. 3 (B).
    G13198209Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the bolts securing the engine wiring harness.
    G13198210Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the fuel pipe insulator No. 2 (A) and fuel pipe insulator No. 4 (B).
    G13198211Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector (A) from fuel injector #3, and remove the fuel pipe insulator No. 1 (B).
  7. Disconnect the connector (C) from fuel injector #4, and remove the fuel pipe insulator No. 5 (D).
    G13198212Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals