LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Fuel Injection System) >> CPC Pressure Sensor >> Removal

CPC Pressure Sensor: Removal

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery, Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the intake duct No. 2. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTAKE DUCT>REMOVAL>INTAKE DUCT NO. 2 .
  3. Disconnect the connector (A) and remove the CPC pressure sensor.
    G13198317Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals