LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Power Rear Gate System) >> Power Rear Gate Control Module >> Installation

Power Rear Gate Control Module: Installation

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: When the power rear gate CM is replaced, set the memory height function again.
  1. Install the power rear gate Control Module.
    NOTE: Connect the connectors in reverse order of removal.
  2. Install the trim panel assembly apron RH. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION .
  3. Install the third-row seats. Ref. to SEATS>THIRD SEAT>INSTALLATION .
  4. Install the floor mat side, floor mat center, and box sub trunk assembly.
  5. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>SAFETY .
scientia non olet · About LEMON Manuals