LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Lighting System) >> Room Light >> Removal

Room Light: Removal

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Do not remove the grille light assembly roof when removing the bulb only.
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel sub assembly. Ref. to EXTERIOR/INTERIOR TRIM>ROOF TRIM>REMOVAL .
  3. Remove the grille light assembly roof.
    1. Remove the connector and remove the screw.
      G13200838Courtesy of SUBARU OF AMERICA, INC.
    2. Release the claws and hooks, and remove the grille light assembly roof.
  4. Remove the room light bulb.
    CAUTION:
    • Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
    • When using a flat tip screwdriver, use an appropriate sized tool for the insertion opening, apply protective tape or cloth around the tool, and be careful not to cause damage.
    1. Release the claws and remove the lens.
      G13200839Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the room light bulb.
      G13200840Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals