High-mounted Stop Light: Inspection
WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Apply battery voltage between the connector terminals to check the lighting condition of the light.
Terminal No. Inspection conditions Specification 1 (+) - 2 (-) Apply battery voltage. Light ON - Replace the stop light assembly high-mounted if faulty is found in the inspection.
NOTE:
Since LED (Light Emitting Diode) is used for the high-mounted stop light, replace the stop light assembly high-mounted if the light does not illuminate.