LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Lighting System) >> Hazard Switch >> Removal

Hazard Switch: Removal

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the grille ventilation assembly center. Ref. to AIR CONDITIONER>AIR VENT GRILLE>REMOVAL>CENTER GRILLE ASSEMBLY .
  3. Remove the switch assembly hazard.
    1. Release the clips and claws.
    2. Disconnect the connector and remove the switch assembly hazard.
    G13200812Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals