Multi-function Display (MFD): Removal

1. Disconnect the ground terminal from battery. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
2. Remove the grille assembly - CTR ventilation. Refer to AIR CONDITIONER (EXCEPT FOR HEV)>AIR VENT GRILLE>REMOVAL>CENTER GRILLE ASSEMBLY .
3. Remove the panel - center UPR, and remove the audio assembly or navigation assembly. Refer to ENTERTAINMENT & MONITORING>AUDIO>REMOVAL .
4. Remove the cover - center UPR.
   1. Release the clip and hook, and then remove the cover - center UPR.

   Courtesy of SUBARU OF AMERICA, INC.

   NOTE: Lightly push up the back of the cover - center UPR, hook the finger to the end portion and pull it toward you to remove it.
5. Remove the multi-function display.

CAUTION: Be careful not to damage the multi-function display or instrument panel.

1. Remove the screws and release the clip.
2. Pull the multi-function display assembly toward yourself, and disconnect the connector.

   Courtesy of SUBARU OF AMERICA, INC.

3. Remove the screws and then remove the multi-function display.

Courtesy of SUBARU OF AMERICA, INC.