LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Rear Regulator and Motor Assembly >> Inspection

Rear Regulator and Motor Assembly: Inspection

  1. Check the motor operation when battery voltage is applied between terminals of the motor - rear connector.
    G12398799Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      Terminal No. Inspection conditions Specification
      2 (+) - 1 (-) Apply battery voltage between terminals. Increase
      1 (+) - 2 (-) Apply battery voltage between terminals. Decrease
    • RH side
    Terminal No. Inspection conditions Specification
    2 (+) - 1 (-) Apply battery voltage between terminals. Increase
    1 (+) - 2 (-) Apply battery voltage between terminals. Decrease
  2. If it does not operate properly as a result of inspection, replace the regulator and motor assembly - rear.
scientia non olet · About LEMON Manuals