Some Motors Do Not Operate

1. Disconnect the power seat switch connector.
2. Measure the resistance between connector terminals when moving the switch to slide forward and slide backward. Refer to SEATS>POWER SEAT SYSTEM>INSPECTION>CHECK POWER SEAT SWITCH .

Is the inspection result normal?

Yes:  Go to  2.

No:  Replace the power seat switch assembly.

1. Disconnect the slide motor connector.
2. Measure the resistance between power seat switch connector and slide motor connector.

Connector & terminal 

(R200) No. 8 - (R202) No. 5:

(R200) No. 7 - (R202) No. 1:

Is the resistance less than 10 Ω?

Yes:  Go to  3.

No:  Check power seat harness.

1. Connect the power seat switch connector and slide motor connector.
2. Apply 12 V to the slide motor and check the motor rotation.

Connector & terminal 

(R202) No. 5 (+) - (R202) No. 1 (-):

(R202) No. 1 (+) - (R202) No. 5 (-):

Does the motor rotate normally?

Yes:  Check for temporary poor contact or mechanical trouble in slide rail.

No:  Slide motor problem. Replace the seat cushion frame assembly.

1. Disconnect the power seat switch connector.
2. Measure the resistance between connector terminals when moving the switch to lifter up and lifter down. Refer to SEATS>POWER SEAT SYSTEM>INSPECTION>CHECK POWER SEAT SWITCH .

Is the inspection result normal?

Yes:  Go to  2.

No:  Replace the power seat switch assembly.

1. Disconnect the lifter motor connector.
2. Measure the resistance between power seat switch connector and lifter motor connector.

Connector & terminal 

(R200) No. 6 - (R204) No. 6:

(R200) No. 9 - (R204) No. 4:

Is the resistance less than 10 Ω? 

Yes:  Go to  3.

No:  Check power seat harness.

1. Connect the power seat switch connector and lifter motor connector.
2. Apply 12 V to the lifter motor and check the motor rotation.

Connector & terminal 

(R204) No. 6 (+) - (R204) No. 4 (-):

(R204) No. 4 (+) - (R204) No. 6 (-):

Does the motor rotate normally?

Yes:  Check for temporary poor contact or mechanical trouble in lifter mechanism.

No:  Lifter motor problem. Replace the seat cushion frame assembly.

1. Disconnect the power seat switch connector.
2. Measure the resistance between connector terminals when moving the switch to reclining forward and reclining backward. Refer to SEATS>POWER SEAT SYSTEM>INSPECTION>CHECK POWER SEAT SWITCH .

Is the inspection result normal?

Yes:  Go to  2.

No:  Replace the power seat switch assembly.

1. Disconnect the reclining motor connector.
2. Measure the resistance between power seat switch connector and reclining motor connector.

Connector & terminal 

(R200) No. 10 - (R201) No. 6:

(R200) No. 5 - (R201) No. 4:

Is the resistance less than 10 Ω?

Yes:  Go to  3.

No:  Check power seat harness.

1. Connect the power seat switch connector and reclining motor connector.
2. Apply 12 V to the reclining motor and check the motor rotation.

Connector & terminal 

(R201) No. 6 (+) - (R201) No. 4 (-):

(R201) No. 4 (+) - (R201) No. 6 (-):

Does the motor rotate normally?

Yes:  Check for temporary poor contact or mechanical trouble in reclining hinge.

No:  Reclining motor problem. Replace the backrest frame assembly.