Lever Assembly

IMPREZA MODEL 

1. Remove the air intake duct. Refer to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE DUCT>REMOVAL .
2. Remove the cover UPR - front.
   1. Remove the clips, and remove the cover UPR - front.

   Courtesy of SUBARU OF AMERICA, INC.

3. Remove the lever assembly - safety.
   1. Disconnect the cable - safety from the lock assembly - front hood.

      Courtesy of SUBARU OF AMERICA, INC.

   2. Remove the clip of the cable - safety.
   3. Remove the bolts, and remove the lever assembly - safety.

   Courtesy of SUBARU OF AMERICA, INC.

CROSSTREK MODEL 

1. Disconnect the ground terminal from battery and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
2. Remove the air intake duct. Refer to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE DUCT>REMOVAL .
3. Remove the cover UPR - front.
   1. Remove the clips, and remove the cover UPR - front.

   Courtesy of SUBARU OF AMERICA, INC.

4. Remove the lever assembly - safety.
   1. Disconnect the connector and the clip.
   2. Disconnect the cable - safety from the lock assembly - front hood.

      Courtesy of SUBARU OF AMERICA, INC.

   3. Remove the clip of the cable - safety.
   4. Remove the bolts, and remove the lever assembly - safety.

   Courtesy of SUBARU OF AMERICA, INC.