Inspection Mode 8
| DTC | Item | Note |
|---|---|---|
| U0101 | LOST COMMUNICATION WITH TCM | - |
| U0128 | Lost Communication With Park Brake Control Module | - |
| U0164 | LOST COMMUNICATION WITH HVAC CONTROL MODULE | - |
| U0402 | INVALID DATA RECEIVED FROM TCM | - |
| U0417 | Invalid Data Received From Park Brake Control Module | - |
| U0424 | INVALID DATA RECEIVED FROM HVAC CONTROL MODULE | - |
- Using the Subaru Select Monitor, perform the clear memory of [Body Control]. Refer to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Refer to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1. Refer to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .
- Confirm that [Customize] items of [Body Control] correspond to the vehicle. Refer to BODY CONTROL (DIAGNOSTICS)>CUSTOMIZE .
- Turn the ignition switch OFF → ON, and wait for 10 seconds or more.
- Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Refer to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. Refer to BODY CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .