LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Starting System & Charging Systems) >> Battery >> Removal

Section 8 (Starting System & Charging Systems): Battery: Removal

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector from battery sensor. (When not replacing the battery)
  3. Remove the battery sensor. (When replacing the battery) Ref. to STARTING/CHARGING SYSTEMS (H4DOTC)>BATTERY SENSOR>REMOVAL .
  4. Disconnect the positive terminal of battery.
  5. Remove the battery cable holder.
  6. Remove the battery holder.
    G13199262Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the battery.
scientia non olet · About LEMON Manuals