Setting Operation For Parts Replacement, Removal/Installation

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Operation list

Main replacement part/operation	Necessary operation	Phenomenon when not performed/disabled function	Reference
TCM Transmission assembly Control valve body	Transmission learning value initialization Transmission learning operation	Abrupt engine increase Excessive shift shock	Ref. to TRANSMISSION (DIAGNOSTICS)>LEARNING CONTROL>PROCEDURE .
VDC control module and hydraulic control unit (VDCCM & H/U) Steering angle sensor Column assembly steering Steering gearbox assembly Steering wheel Universal joint UPR and LWR Front wheel alignment adjustment For others, refer to the operation instructions for each part.	VDC sensor midpoint setting Parameter selection and registration (when replacing VDCCM & H/U)	VDC system does not operate normally (Warning light illuminates) Difference of steering effort between right and left Eyesight does not operate normally	Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U)>ADJUSTMENT . Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U)>MAINTENANCE MODE .
Auto headlight beam leveler Control Module	Auto headlight beam leveler system initialization/reinitialization	AUTO HEADLIGHT BEAM LEVELER SYSTEM	Ref. to LIGHTING SYSTEM>AUTO HEADLIGHT BEAM LEVELER SYSTEM>PROCEDURE .
Regulator & motor assembly - front (RH, LH) Glass assembly - front door (RH, LH), sash assembly - partition (RH, LH) or sash assembly lower (RH, LH) Weather strip body side flange front (RH, LH)	Power window system initialization	Door glass automatic open/close function Auto-reverse function Operation after key OFF (IG OFF)	Ref. to POWER WINDOW (DIAGNOSTICS)>WORK SUPPORT>OPERATION .

NOTE: For settings or other procedures for immobilizer related part, refer to "REGISTRATION MANUAL FOR IMMOBILIZER".