LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Front Suspension System And Wheel Alignment) >> Wheel Alignment >> Inspection >> Camber

Wheel Alignment: Inspection: Camber

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the wheel on the turning radius gauge.
    NOTE: Make sure the ground contact surfaces of the front and rear wheels are at the same height.
  2. Set the adapter into the center of wheel, and then set the wheel alignment gauge.
    G13199280Courtesy of SUBARU OF AMERICA, INC.
  3. Measure the camber angle in accordance with the operation manual for wheel alignment gauge.
    Front camber (difference between RH and LH 45' or less) Rear camber (difference between RH and LH 45' or less)
    0°00'±0°45' -0°30'±0°45'
scientia non olet · About LEMON Manuals