LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Front Suspension System And Wheel Alignment) >> General Description >> Preparation Tool >> General Tool

General Tool

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
TOOL NAME REMARKS
Alignment gauge Used for measuring wheel alignment.
Alignment gauge adapter Used for measuring wheel alignment.
Coil spring compressor Used for disassembling and assembling strut assembly and shock absorber assembly.
Shackle
  • Two units used for hanging power unit.
  • Attached to both end of chain sling and connected to engine hook.
  • Load capacity: 250 kg (551 lb) or more
Sling belt
  • Used for removing and installing the crossmember COMPL front.
  • Width: 35 - 40 mm (1.38 - 1.57 in)
  • Length: 2 m (6.6 ft)
  • Load capacity: 1 t (2205 lb) or more
Tie-rod ball joint puller Used for disconnecting tie-rod end.
Dial gauge Used for strut damper measurement.
Turning radius gauge Used for measuring wheel alignment.
Toe-in gauge Used for toe-in measurement.
DST-i Used together with Subaru Select Monitor 4.
scientia non olet · About LEMON Manuals