Pitching Stopper

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Install the pitching stopper.
Tightening torque:

T1: 50 N.m (5.1 kgf-m, 36.9 ft-lb)

T2: 58 N.m (5.9 kgf-m, 42.8 ft-lb)

Fig 1: Pitching Stopper Bolts (With Tightening Torque Specification)
Courtesy of SUBARU OF AMERICA, INC.
Install the pitching stopper plate.
Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)
Connect the transmission radio ground cord.
1. Connect the coupling connector.
2. Install the clips.
Connect the air breather hose to the clip.
Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTERCOOLER>INSTALLATION .