LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (CVT Transaxle) >> Secondary Speed Sensor >> Removal

Secondary Speed Sensor: Removal

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If water or oil contacts the connector terminal of secondary speed sensor, replace it with a new part.
  1. Remove the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>REMOVAL .
  2. Remove the transmission case cover No. 1.
    G13200037Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the secondary speed sensor harness connector.
  4. Remove the secondary speed sensor.
CAUTION: After removing the sensors, plug the holes to avoid foreign materials intruding as necessary.
G09482003Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals