LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (CVT Transaxle) >> Secondary Pressure Sensor >> Inspection

Secondary Pressure Sensor: Inspection

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start and warm up the engine.
  2. Shift the select lever to "P" or "N" range.
  3. Depress the brake pedal and hold it.
  4. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is idling. Ref. to TRANSMISSION (DIAGNOSTICS)>DATA MONITOR>OPERATION .

    Specification: 

    Approx. 0.8 V

  5. Check "secondary pressure sensor voltage" with engine stopped and ignition switch turned on by using Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS)>DATA MONITOR>OPERATION .

    Specification: 

    Approx. 0.5 V

scientia non olet · About LEMON Manuals