LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (CVT Transaxle) >> Primary Speed Sensor >> Removal

Primary Speed Sensor: Removal

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If water or oil contacts the connector terminal of primary speed sensor, replace it with a new part.
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTERCOOLER>REMOVAL .
  3. Clean the transmission exterior.
  4. Disconnect the primary speed sensor harness connector.
  5. Remove the primary speed sensor.
    CAUTION: After removing the sensors, plug the holes to avoid foreign materials intruding as necessary.
    G09482007Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals