Intermediate Case: Assembly

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Install the reverse brake. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>REVERSE BRAKE ASSEMBLY>ASSEMBLY .
Install the plug to the intermediate case with a new O-ring.
CAUTION:
- Before installing O-rings, apply sufficient amount of CVTF to avoid damage and deformation.
- Use SUBARU genuine CVTF.
- Be careful not to incorrectly install or fail to install O-rings and other such parts.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)
Install the parking support.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)
Temporarily install the filler plug.

NOTE: Replace the filler plug gasket with a new part after adjusting CVTF fluid.