Front Wheel Speed Sensor: Removal
WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- If water or oil contacts the connector terminal of front wheel speed sensor, replace it with a new part.
- If CVTF has leaked when the front wheel speed sensor is removed, adjust the CVTF level after installing the front wheel speed sensor.
- Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Clean the transmission exterior.
- Disconnect the front wheel speed sensor harness connector.
- Remove the front wheel speed sensor.
CAUTION:
After removing the sensors, plug the holes to avoid foreign materials intruding as necessary.