Converter Case: Assembly

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Using a new gasket, install the oil drain plug.
Tightening torque:

70 N.m (7.1 kgf-m, 51.6 ft-lb)
Temporarily install the overflow drain plug.
NOTE: Replace the gasket of overflow drain plug with a new part after installing the transmission body to vehicle and adjusting differential gear oil.
Install the plugs with new O-rings.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)
Install the pitching stopper bracket.
Tightening torque:

41 N.m (4.2 kgf-m, 30.2 ft-lb)