AT learning: Procedure: Notes
WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Perform the AT learning mode when the following work has been performed. Replacement of TCM/Replacement or disassembly of transmission body/Replacement of control valve body/Clearing AT leaning value is executed.
- For detailed operation procedures of Subaru Select Monitor 4, refer to "Help" of application.
- Do not turn the power of the Subaru Select Monitor OFF during work, and do not disconnect the data link connector.