LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (CVT Transaxle) >> AT learning >> Procedure >> Clear At Learning Value

Clear At Learning Value

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be sure to perform the AT learning mode after performing Clear AT learning value.
  1. On «Start» screen, select «Diagnosis».
  2. On «Vehicle selection» screen, input the vehicle information and select «Confirmed».
  3. On «Main Menu» screen, select «Each System».
  4. On «Select System» screen, select «Transmission Control System».
  5. On «Select Function» screen, select «Work Support».
  6. On «Work Support» screen, select «Clear AT learning value».
  7. Follow the messages displayed on the screen when working.
  8. When «Clear completed. Turn IG_SW OFF. Perform AT learning again.» is displayed, Clear AT learning value is completed.
scientia non olet · About LEMON Manuals