LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Vehicle Dynamics Control (VDC) System) >> Auto Vehicle Hold Switch >> Installation

Auto Vehicle Hold Switch: Installation

WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the AVH switch.
  2. Install the switch panel front. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CONSOLE>INSTALLATION .
  3. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY>GROUND TERMINAL REMOVAL OR INSTALLATION .
    NOTE: After connecting the battery ground terminal, place the select lever in the "P" position.
scientia non olet · About LEMON Manuals